Pairing our RLU (Robot Load/Unload) system along with one of our SAAM (Stand Alone Automated Measurement) solutions brings advanced, high precision 3D industrial metrology capabilities to a variety of manufacturing processes. Our Near Line Inspection System (NLIS) is the quick and easy way to integrate 3D metrology directly into the production processes of your company.
Near Line Metrology Systems
NLIS-100-M10
Pairing a machine tending robot with an Automated Metrology system brings advanced, high precision 3D metrology capabilities to nearly any manufacturing process. The NLIS-100-M10 near line metrology system from EDM Intelligent Solutions is the quick and easy way to integrate 3D metrology directly into the production process without having to replace your current machine tools.
Automated form and roughness measurement Features
- Intuitive user interface with administrator, engineer, and operator modules
- Ability to set up a measurement once and run many times in production environment
- Offline and online program generation
- Automatically measures specified dimensions and generates pass/fail report
- Precision positioning capabilities with rotation/tilt unit and 3R/EROWA
- True position measurement capability
- Datum alignment procedures
- Automatically tended by a FANUC M10iA robot
Hardware Specifications
3D Imaging Sensor
- XYZ Travel: 200mm x 200mm x 100mm
- Positioning Speed: 20 mm/s
- Mesurement Speed: ≤ 1.7 million points/sec
- Objectives: 2.5x, 5x, 10x, 20x, 50x, 100x
- Min Measurable Roughness: 0.03 µm, 1.2 µinch
- Min Measurable Radius: 1 µm
- Finest vertical resolution: 10 nm
Rotation/Tilt Unit
- Rotation Axis: 360° continuous rotation; motorized
- Tilt Axis: -15° to +90°; motorized
- Maximum Payload: 4 kg
- Compatibility: 3R, EROWA, three-jaw lever chuck
Machine Base for 3D Imaging Sensor
- All steel construction with 3/4″ ground steel table top
- Plexiglass safety enclosure on three sides and top
- Optional safety light curtain on front with integrated safety interlock circuit
FANUC Robotics M10iA
- Axes: 6
- Payload: 12 kg
- Repeatability: +/- 0.05 mm
- Reach: 1098 mm
- Motion Range [°]
- J1: 340/360
- J2: 250
- J3: 340
- J4: 380
- J5: 380
- J6: 720
- Maximum Speed [°/s]
- J1: 260
- J2: 280
- J3: 315
- J4: 430
- J5: 430
- J6: 630
Add-ons
- Integrated bar code reader to automatically load part number, serial number, operator, machine, etc…
NLIS-200-M20
Pairing a machine tending robot with an Automated Metrology system brings advanced, high precision 3D metrology capabilities to nearly any manufacturing process. The NLIS-200-M20 near line metrology system from EDM Intelligent Solutions is the quick and easy way to integrate 3D metrology directly into the production process without the having to replace your current machine tools.
 |  |  |  |
Features
- Automated form and roughness measurement
- Intuitive user interface with administrator, engineer, and operator modules
- Ability to set up a measurement once and run many times in production environment
- Offline and online program generation
- Automatically measures specified dimensions and generates pass/fail report
- Precision positioning capabilities with rotation/tilt unit and 3R/EROWA
- True position measurement capability
- Datum alignment procedures
- Automatically tended by a FANUC M20iB robot
Hardware Specifications
3D Imaging Sensor
- XYZ Travel: 200mm x 200mm x 200mm
- Positioning Speed: 20 mm/s
- Mesurement Speed: ≤ 1.7 million points/sec
- Objectives: 2.5x, 5x, 10x, 20x, 50x, 100x
- Min Measurable Roughness: 0.03 µm, 1.2 µinch
- Min Measurable Radius: 1 µm
- Finest vertical resolution: 10 nm
Rotation/Tilt Unit
- Rotation Axis: 360° continuous rotation; motorized
- Tilt Axis: -15° to +90°; motorized
- Maximum Payload: 4 kg
- Compatibility: 3R, EROWA, three-jaw lever chuck
Machine Base for 3D Imaging Sensor
- All steel construction with 3/4″ ground steel table top
- Plexiglass safety enclosure on three sides and top
- Optional safety light curtain on front with integrated safety interlock circuit
FANUC Robotics M20iB
- Axes: 6
- Payload: 25 kg
- Repeatability: +/- 0.05 mm
- Reach: 1853 mm
- Motion Range [°]
- J1: 340/360
- J2: 240
- J3: 303
- J4: 400
- J5: 290
- J6: 540
- Maximum Speed [°/s]
- J1: 205
- J2: 205
- J3: 260
- J4: 415
- J5: 415
- J6: 880
Add-ons
- Integrated bar code reader to automatically load part number, serial number, operator, machine, etc…